IEI Integration ITDB-100L - Manual (Page 57)

ITDB-100L Barcode Reader
Page 48
ƒ Manual Exposure:
Move the slide bar or enter the value to set the exposure time.
ƒ GAIN:
Move the slide bar or enter the value to adjust the gain setting.
ƒ LED Brightness:
Move the slide bar or enter the value to adjust the LED brightness.
ƒ Decode timeout(ms):
Move the slide bar or enter the value to adjust the decode time-out setting.
ƒ Decode interval(ms):
Move the slide bar or enter the value to adjust the decode interval setting.
ƒ Train Code:
Refer to Section 5.6.2 for details.
ƒ TEST button:
Click the TEST button to scan a barcode by using the current settings
ƒ SAVE button:
Click the SAVE button to save the current settings as a setting file.
ƒ LOAD button:
Click the LOAD button to load a saved setting file to the ITDB-100L.
ƒ Symbology Setting:
Click the icon to bring up the Symbology Setting menu (Figure 5-18)
which allows the user to select the supported barcode types and train a
barcode image. When a barcode is being trained, the user cannot select the
supported barcode types. For using the training mode, refer to Section 5.6.2
for details.
NOTE:
The user can click the icon located in front of a barcode to
configure its properties.