IEI Integration ITDB-100L - Manual (Page 51)

ITDB-100L Barcode Reader
Page 42
ƒ Trigger mode:
The user can set the trigger behavior as One Shot, Serial Shot, Batch or
Presentation . When setting to Serial Shot, the ITDB-100L scan images
continuously until an image is decoded successfully.
ƒ Decode result format:
The user can set the scanned result format as Image & Decode, Image or
Decode .
ƒ Trigger button:
The user can click the button to trigger the ITDB-100L.
5.6.1 Region of Interest
The Region of Interest (ROI) item allows setting the scan area of the barcode reader.
Follow the steps below to use the ROI function.
Step 1: Click the check box to enable the ROI function (Figure 5-10).
Step 2: Draw a frame to select the desired scan area (Figure 5-10).
Figure 5-10: Setting the Region of Interest
Step 3: To lock the ROI setting, right-click the screen, and then select Lock
(Figure 5-11). The frame turns into green, indicating that the ROI setting is
locked.
The user can select Full Screen to set the ROI to full screen mode.