IEI Integration ITDB-100L - Manual (Page 52)

ITDB-100L Barcode Reader
Page 43
Figure 5-11: Locking the ROI Setting
5.6.2 Training Mode
The user can set a scanned barcode as a sample image so that the barcode reader
decodes only the same barcode type and size. Follow the steps below to set a barcode
image to training mode.
Step 1: Click the Train Code item (Figure 5-12) to start the training mode function.
The user can also press and hold the trigger and tuning control button for four
seconds to start the function. Refer to Figure 1-3 for the location of the button.
NOTE:
The Train Code item can also be found in the SETTING and
Symbology Setting menus