1 overview, 2 launching the setup tool, Verview – IEI Integration ITDB-100L User Manual
Page 45: Aunching the, Etup, Figure 5-1: setup tool icon
ITDB-100L Barcode Reader
Page 36
5.1 Overview
The barcode reader setup tool allows configuration of the ITDB-100L via a computer.
Refer to the following sections for detailed information.
NOTE:
The setup tool supports the OS versions listed below:
Microsoft® Windows® XP 32-bit & 64-bit
Microsoft® Windows® Vista™ 32-bit & 64-bit
Microsoft® Windows® 7 32-bit & 64-bit
5.2 Launching the Setup Tool
Step 1:
Ensure that the ITDB-100L is connected to the computer and power supply. A
beep should be generated when the ITDB-100L is fed with power.
Step 2:
If the setup tool is installed to the connected computer, an ITDB Barcode
Verifier
(Figure 5-1) icon should appear on the Windows desktop. Double click
the icon to launch the barcode reader setup tool.
Figure 5-1: Setup Tool Icon