A.2.2 cleaning tools – IEI Integration ITDB-100L User Manual
Page 83
ITDB-100L Barcode Reader
Page 74
Be cautious of all small removable components when vacuuming the
ITDB-100L.
Turn the ITDB-100L off before cleaning the ITDB-100L.
Never drop any objects or liquids through the openings of the ITDB-100L.
Be cautious of any possible allergic reactions to solvents or chemicals used
when cleaning the ITDB-100L.
Avoid eating, drinking and smoking within vicinity of the ITDB-100L.
A.2.2 Cleaning Tools
Some components in the ITDB-100L may only be cleaned using a product specifically
designed for the purpose. In such case, the product will be explicitly mentioned in the
cleaning tips. Below is a list of items to use when cleaning the ITDB-100L.
Cloth – Although paper towels or tissues can be used, a soft, clean piece of
cloth is recommended when cleaning the ITDB-100L.
Water or rubbing alcohol – A cloth moistened with water or rubbing alcohol
can be used to clean the ITDB-100L.
Using solvents – The use of solvents is not recommended when cleaning the
ITDB-100L as they may damage the plastic parts.
Vacuum cleaner – Using a vacuum specifically designed for computers is
one of the best methods of cleaning the ITDB-100L. Dust and dirt can restrict
the airflow in the ITDB-100L and cause its circuitry to corrode.
Cotton swabs - Cotton swaps moistened with rubbing alcohol or water are
excellent tools for wiping hard to reach areas.
Foam swabs - Whenever possible, it is best to use lint free swabs such as
foam swabs for cleaning.