3 external peripheral interface connectors, 1 6-pin connector for trigger connection, Xternal – IEI Integration ITDB-100L User Manual
Page 27: Eripheral, Nterface, Onnectors, Figure 3-3: adjusting the itdb-100l
Advertising
ITDB-100L Barcode Reader
Page 18
Figure 3-3:
Adjusting the ITDB-100L
3.3 External Peripheral Interface Connectors
The ITDB-100L has the following connectors. Detailed descriptions of the connectors can
be found in the subsections below.
6-pin connector for trigger connection
Ethernet
Micro
USB
Power
input
3.3.1 6-Pin Connector for Trigger Connection
The 6-pin connector on the rear panel allows connection to an external trigger device or a
sensor. The user can use the supplied trigger connection cable to connect the ITDB-100L
to an external device.
Step 1:
Locate the 6-pin connector
. The location of the 6-pin connector is shown in
.
Advertising