3 setup tool installation, Etup, Nstallation – IEI Integration ITDB-100L User Manual
Page 41: Figure 4-7: installshield wizard
ITDB-100L Barcode Reader
Page 32
4.3 Setup Tool Installation
To install the barcode reader setup tool, please follow the steps below.
NOTE:
The setup tool supports the following OS versions:
Microsoft® Windows® XP 32-bit and 64-bit
Microsoft® Windows® Vista™ 32-bit and 64-bit
Microsoft® Windows® 7 32-bit and 64-bit
Step 1:
Ensure that the ITDB-100L is connected to the computer and power supply. If
the barcode reader cannot be recognized by the computer, install the device
driver. Refer to Section 4.2 for details.
Step 2:
Insert the driver CD.
Step 3:
Locate the ITDB Barcode Verifier file in the driver CD. Double click the setup
file to start the installation.
Step 4:
The InstallShield Wizard welcome window appears. Click Next to start.
Figure 4-7: InstallShield Wizard