Repair parts-spreader bill of materials – SaltDogg SHPE1500 Series Electric Drive Poly Hopper Spreader v.2 User Manual

Page 8

Advertising
background image

8

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

3021240 Rev. C

Repair Parts-Spreader

Bill of Materials

SHPE1500 SALTDOGG

®

SPREADER WARRANTY INFORMATION

This warranty replaces all previous warranties and no employee of this company is authorized to extend additional warranties, or

agreements, or implications not explicitly covered herein. Buyers Products Company warrants all parts of the product to be free from

defects in material and workmanship for a period of one (1) year. Parts must be properly installed and used under normal conditions.

Normal wear is excluded. Any part, which has been altered, including modifications, misuse, accident, or lack of maintenance will

not be considered under this warranty. The sole responsibility of Buyers Products Company under this warranty is limited to repair-

ing or replacing any part(s), which are returned, prepaid, 30 days after such defect is discovered, and returned part(s) are found to be

defective by Buyers Products Company. Authorization from Buyers Products Company must be obtained before returning any part. The

following information must accompany defective parts returned to Buyers Products Company: RMA #, spreader model, serial number,

date installed, and distributor from whom purchased. Buyers Products Company shall not be liable for damage arising out of failure of

any unit to operate properly, or failure, or delay in work, or for any consequential damages. No charges for transportation or labor per-

formed on any part will be allowed under this warranty.

ITEM

PART NO.

QTY.

DESCRIPTION

1

3006837

1

HOPPER, ASSEMBLY,1.5 CU YD POLY

3025163

1

HOPPER, ASSEMBLY,1.5 CU YD POLY, RED

3025165

1

HOPPER, ASSEMBLY,1.5 CU YD POLY, YELLOW

2

3007412

1

CHUTE POLY STD. SHPE1500

3

3007039

1

SCREEN, WELDMENT SHPE1500

4

3007115

4

WASHER, FLAT 3/8 X 1.5 X.048 SST

5

4

WASHER, LOCK RHS-3/8 SST

6

3006760

4

SCREW, HHC-3/8-16 X 1/2 SST

7

3008987

1

PLATE, SERIAL NO. SHPE1500 SERIES

8

3007522

2

SCREW, SHEET MTL #12x1.0 HEX WASHER

HD SST

9

3014199

1

CONTROLLER, SHPE, SALT DOGG

10

3006724

1

WIRE HARNESS, MAIN

11

3006842

1

POWER CABLE, CONTROL BOX

12

1496505

1

HOLD DOWN KIT, SPREADER (4 STRAPS)

13

3006964

1

TARP, SHPE1500

14

0203700

1

WIRE ASSEMBLY, 36 LONG

15

TS9

8

STRAP, RUBBER TARP 9"

16

9225

16

S-HOOK, 2.5" ZN, TARP STRAP

9049 Tyler Blvd. • Mentor, Ohio 44060

Phone (440) 974-8888 • Fax (800) 841-8003

www.saltdogg.com

Advertising