SaltDogg 92440SSA Series Under Tailgate Spreader - Manual (Page 2)

2
TM
D. Align the pin brace (4) on the dump body using
the iron brace (3) for exact positioning. For proper
fit, hanger iron brace may require some minor
bending.
E. Weld the pin braces (4) to the dump body sides,
all around.
F. Attach the iron braces (3) to the pin braces on
the sides of the dump body and the sides of the
spreader using two hairpin cotter pins (Item 5).
G. If there is a gap between the spreader and the
dump body, weld or bolt a steel strip to the forward
edge of the spreader to cover the gap.
H. If you have purchased the tailgate side shields
(purchased separately as P/N 924F0106), bolt or
weld them to the inside of the tailgate to prevent
material spillage at the ends of the spreader.
1
2
3
4
5
DUMP BODY
SPREADER
Mounting Hardware installation drawing
Bill of Materials
1 2 Quick Detach Plate 3009526
2 2 Hinge Pin 3011139
3 2 Hanger Iron Brace 3011137
4 2 Pin Brace 3000210
5 6 Hair Pin Cotter 5/32" –
item qty. description
Figure 1