Maple Systems MAPware-7000 - Manual (Page 114)

MAPware-7000 Ladder Logic Guide 106
1010-1041 rev. 00
Instruction 66- Hex to ASCII Conversion
Expression:
Space Requirement: 1 line x 5 column Location Requirement: Middle, Right rail
Function:
When the input is ON, the hexadecimal data of n registers starting with A is converted into ASCII
characters and stored in B and after. The uppermost digit of source A is stored in lower byte of
destination B, and followed in this order. The allowable range of n is 1 to 32.
Execution Condition:
Input Operation Output
OFF No execution OFF
ON Execution ON
Operand:
Coil or Bit Register Constant Index
Name X Y B S T. C. M
X
W Y
W B
W S
W
T C D I J K
M
W
A Source √ √ √ √ √ √ √ √ √ √ √
n Data Size 1-32
B Destination √ √ √ √ √ √
Example:
When B010 is ON, 4 words data of D0100 to D0103 are converted into ASCII characters, and
stored in 8 words registers starting with D0220.
Note:
If index register (I, J or K) is used for the operand A, only n = 1 is allowed