Maple Systems MAPware-7000 - Manual (Page 147)

139 MAPware-7000 Ladder Logic Guide
1010-1041 rev. 00
Instruction 91- Step Sequence Output
Expression:
Space Requirement: 1 line x 3 column Location Requirement: Middle
Function:
When the input is ON, the device A is set to ON and the devices of STIN instructions on the same
rung are reset to OFF.
Execution Condition:
Input Operation Output
OFF No execution ---
ON Execution ---
Operand:
Coil or Bit Register Constant Index
Name X Y B S T. C. M
X
W Y
W B
W S
W
T C D I J K
M
W
A Step Device √
Example:
See example on STIN instruction.
Note:
- The STIZ, STIN and STOT instructions are used together to configure the step sequence.
- Two or more STOT instructions can be placed on one rung to perform simultaneous
sequences.
- Two or more STIN instructions can be placed on one rung in parallel or in series to
perform loop of sequences. (Max. 11 STIN instructions on one rung)