Maple Systems STEPware-100 - Manual (Page 37)

To modify this parameter using STEPware-100:
1. Open the Configuration Editor.
2. In the OIT Operational Settings group box, choose the Editor button to open the Password
Editor dialog box.
3. In the Setup text box, enter a five-digit numeric password.
4. Choose the Done button.
To modify this parameter in Configuration mode:
1. At Setup Password, use the OIT’s numeric keys to enter a five-digit numeric
password. Refer to the Configuration Mode section in this chapter for more
information.
Printer Settings
Refer to Chapter 7: Printer for more information.
34 STEP1 Protocol Operation Manual
1010-0096, Rev. 04