Maple Systems STEPware-100 - Manual (Page 9)

7. In Pos. 3:
• choose the Non-Printable button and the Non-Printable Characters dialog box appears
• select {CR}
• then choose the Done button to return to the Function Key ASCII String Editor dialog box.
NOTE:To enter an ASCII character from 128 to 255, choose the Extended button in the
Non-Printable Characters dialog box, type the ASCII code, and then choose the OK button.
8. In Pos. 4:
• double click Pos. 4 and the Non-Printable Characters dialog box appears
• double click {LF} to select
LF
and return to the Function Key ASCII String Editor dialog box.
9. Choose the Done button to return to the Function Key Editor dialog box.
10. In the Key OFF Message group box, choose the Edit button to display the Function
Key ASCII String Editor dialog box.
11. In Pos. 1, type o.
12. In Pos. 2, type f.
13. In Pos. 3, type f.
14. In Pos. 4:
• double click Pos. 4 and the Non-Printable Characters dialog box appears
• double click {CR} to select
CR
and return to the Function Key ASCII String Editor dialog box.
15. In Pos. 5:
• double click Pos. 5 and the Non-Printable Characters dialog box appears
• double click {LF} to select
LF
and return to the Function Key ASCII String Editor dialog box.
16. Choose the Done button to return to the Function Key Editor dialog box.
6 STEP1 Protocol Operation Manual
1010-0096, Rev. 04
Choose the Extended button to
select ASCII characters 128 to 255.
Place one of these non-printable characters in your
predefined ASCII string by selecting the character
with your mouse and then choosing the Done button.