A7-6 – Yokogawa EJX930A User Manual

Page 143

Advertising
background image

<Appendix 7. Software Download>

A7-6

IM 01C25T02-01E

A7.10 Comments on System/Network Management VFD Parameters

Relating to Software Download

IMPORTANT

Do not turn off the power to a field device immediately after changing parameter settings. Data writing

actions to the EEPROM are dual redandant to ensure reliability. If the power is turned off within 60 seconds

after setup, the parameters may revert to the previous settings.

(1) DWNLD_PROPERTY

Sub

Index

Element

Size

(Bytes)

Description

1

Download Class

1

Indicates the download class.

1: Class 1

2

Write Rsp Returned For ACTIVATE

1

Indicates whether a write response is returned to the ACTIVATE

command.

1: Write Response Returned

3

Write Rsp Returned For PREPARE

1

Indicates whether a write response is returned to the PREPARE

command.

1: Write Response Returned

4

Reserved

1

(Reserved)

5

ReadyForDwnld Delay Secs

2

Indicates the maximum delay after receipt of the PREPARE_

FOR_DWNLD command to proceed to transition from DWNLD_

NOT_READY to DWNLD_READY.

6

Activation Delay Secs

2

Indicates the maximum delay after receipt of the ACTIVATE

command to proceed to transition from DWNLD_OK to

DWNLD_NOT_READY.

(2) DOMAIN_DESCRIPTOR

Sub

Index

Element

Size

(Bytes)

Description

1

Command

1

Reads/writes software download commands.

1: PREPARE_FOR_DWNLD (instruction of download preparation)

2: ACTIVATE (activation instruction)

3: CANCEL_DWNLD (instruction of download cancellation)

2

State

1

Indicates the current download status.

1: DWNLD_NOT_READY (download not ready)

2: DWNLD_PREPARING (download under preparation)

3: DWNLD_READY (ready for download)

4: DWNLD_OK (download complete)

5: DOWNLOADING (download underway)

6: CHECKSUM_FAIL (not used in this product)

7: FMS_DOWNLOAD_FAIL (failure during download)

8: DWNLD_INCOMPLETE (download error detected at restart)

9: VCR_FAIL (not used in this product)

10: OTHER (download error other than 6 and 7 detected)

3

Error Code

2

Indicates the error during a download and activation.

0: success, configuration retained (download successfully

completed)

32768 - 65535: Download error (See Table 4 for error codes.)

4

Download Domain Index

4

Indicates the index number of the domain for software downloading.

5

Download Domain Header

Index

4

Indicates the index number of the domain header to which the

download is performing.

6

Activated Domain Header

Index

4

Indicates the index numbers of the domain header currently

running.

7

Domain Name

8

Indicates the domain name. With this product, Domain Name

indicates the field device name.

Advertising