Yokogawa ADMAG AXW - Manual (Page 34)

<6. OUTLINE>
6-3
IM 01E25D11-01EN
n MODEL AND SUFFIX CODE
 For Process Connections other than JIS F12 (JIS 75M)
Model Suffix Code Description Available Size / Model
AXW500 Size 500 mm (20 in.) Remote Flowtube
AXW600 Size 600 mm (24 in.) Remote Flowtube
AXW700 Size 700 mm (28 in.) Remote Flowtube
AXW800 Size 800 mm (32 in.) Remote Flowtube
AXW900 Size 900 mm (36 in.) Remote Flowtube
AXW10L Size 1000 mm (40 in.) Remote Flowtube
AXW12L Size 1200 mm (48 in.) Remote Flowtube
AXW14L Size 1400 mm (56 in.) Remote Flowtube
AXW16L Size 1600 mm (64 in.) Remote Flowtube
AXW18L Size 1800 mm (72 in.) Remote Flowtube
Use G General-purpose type
W Submersible type
Converter -N Remote Flowtube for Combined Use with AXFA11
Power Supply N Remote Flowtube
Lining (*1) F Fluorocarbon PTFE See “Proces Connection”.
H Natuarl Hard Rubber See “Proces Connection”.
D Natuarl Soft Rubber See “Proces Connection”.
U Polyurethane Rubber See “Proces Connection”.
Electrode Material (*1) L JIS SUS316L (AISI 316L SS Equivalent)
H Hastelloy C276 Equivalent
Electrode Structure 1 Non-replaceable
Grounding Structure (*2) N None (*3), available as optional feature (GR1)
Process Connection
(*4)
-CA1
ASME B16.5 Class 150 Flange (Carbon Steel) 500 mm (20 in.) and 600 mm (24 in.)
for lining code F/H/D/U
ASME B16.47 Series A Class 150 Flange
(Carbon Steel)
700 mm (28 in.) to 1000 mm (40 in.)
for lining code F/H/D/U
-CB1 AWWA C207 Class D (Carbon Steel)
700 mm (28 in.) to 1000 mm (40 in.)
for lining code F/H/D/U
1200 mm (48 in.) for lining code H
-CEJ EN1092-1 PN6 Flange (Carbon Steel)
1200 mm (48 in.) to 1800 mm (72 in.)
for lining code H -CEK
EN1092-1 PN10 Flange (Carbon Steel)
(fluid pressure up to 0.6 MPa)
-CE1
EN1092-1 PN10 Flange (Carbon Steel)
(fluid pressure up to 1 MPa)
500 mm (20 in.) to 1000 mm (40 in.)
for lining code F/H/D/U
1200 mm (48 in.) to 1800 mm (72 in.)
for lining code H
-CE2
EN1092-1 PN16 Flange (Carbon Steel)
(fluid pressure up to 1 MPa)
500 mm (20 in.) to 1000 mm (40 in.)
for lining code F/H/D/U
-CJ1 JIS B2220 10K Flange (Carbon Steel)
-CS1 AS2129 Table D (Carbon Steel) 500 mm (20 in.) to 1000 mm (40 in.)
for lining code F/H/D/U
1200 mm (48 in.) for lining code H
-CS2 AS2129 Table E (Carbon Steel)
-CT1 AS4087 PN16 (Carbon Steel)
Lay Length N Standard
Electrical Connection -0 JIS G1/2 female
-2 ANSI 1/2 NPT female Not available for Submersible type
-4 ISO M20 x 1.5 female Not available for Submersible type
Indicator N None
Calibration B Standard
Optional Specifications / Optional code
*1: Users must consider the characteristics of selected wetted parts material and influence of process fluids. The use of inappropriate materials
can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the
instrument itself can be damaged and that fragments from the instrument can contaminate the user’s process fluids.
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-
temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material.
*2: Select optional grounding rings (code GR1) if necessary. For example, grounding rings are necessary for plastic piping.
*3: “None” is applicable only for metal piping and wiring for grounding will be necessary so that the electric potentials between flowtube and piping
flange should be the same.
*4: Contact Yokogawa office for ISO flange connection.