Yokogawa ADMAG CA - Manual (Page 56)

IM 1E8B0-01E
7-6
7. OPERATION VIA BRAIN TERMINAL
7.1.4 Displaying Flow Rate Data
Flow rate data can be displayed on the BT200 screen according to the following proce-
dure.
- -WELCOME- -
BRAIN TERMINAL
ID:BT200
Check cable connection
and press the ENT key.
Turn the power on and the screen on the left appears after "please
wait..." is displayed for a few seconds.
ON/OFF
PARAMETER
01:MODEL
CA10-
ٗٗٗ
02:TAG NO.
03:SELF CHECK
GOOD
MENU
A:DISPLAY
B:SET
C:ADJUST
D:DISP SEL
E:TOTAL SET
F:PULSE SET
PARAM
A10:FLOW RATE(%)
0.6%
A20:FLOW RATE
0.06m
3 /h
A30:TOTAL
0
PARAM
A10:FLOW RATE(%)
0.6%
A20:FLOW RATE
0.06m
3 /h
A30:TOTAL
0
HOME SET ADJ ESC
UTIL FEED
Pressing the ENTER key causes the initial data screen on the left
to be displayed.
Pressing the F4 key or the ENTER key causes the menu screen on
the left to be displayed.
F1
F4
ENTER
ENTER
ENTER
F2 F3 F4
OK
or
● With "A : DISPLAY" displayed on the menu panel in the
inverse video bar, press the ENTER key and the flow data
screen appears.
● A maximum of three data items can be displayed on one
screen.
● Data are communicated at an interval of 5 seconds. Thus, the
data are updated every 5 seconds.
● The arrow keys, [ ], [ ] or [ ], [ ], are used for page feeds or
item selection.
Execution of the function keys
The tag number specified upon ordering is entered.
Inverse video bar
< > < > DATA DIAG ESC PRNT
DATA DIAG PRNT ESC
F1: Updates the current data. Pressing this key causes forcible
communication with the connected instruments and the data
of the instruments are loaded to be read.
F2: Displays the self-check screen.
F3: Displays the parameter print screen.
F4: Returns to the previous panel (menu panel).