Yokogawa ADMAG CA - Manual (Page 8)

IM 1E8B0-01E
2-2
2. HANDLING PRECAUTIONS
2.3 Storage Precautions
In case the instrument is expected to be stored over a long term, please give attention to
the followings ;
* The instrument should be stored in its original packing condition.
* The storage location should be selected according to the following conditions:
1) The location where it is not exposed to rain or water.
2) The location where there is few vibration or shock.
3) Temperature and humidity should be:
Temperature : -20 to 50˚C (-4 to 122˚F)
Humidity : 5 to 80% RH (no condensation)
Preferable ambient temperature and humidity are 25˚C(75˚F) and about 65%
RH.
2.4 Installation Location Precautions
Please select the installation location considering the following items to ensure long term
stable operation of the flowmeter.
• Ambient Temperature : Please avoid to install the instrument at the location where temperature changes
continuously. If the location receives radiant heat from the plant, provide heat insulation
or improve ventilation.
• Atmospheric Condition : Please avoid to install the instrument in an corrosive atmosphere. In case of installing
in the corrosive atmosphere, please keep ventilating sufficiently and prevent rain from
entering the conduit.
• Vibration or Shock : Please avoid to install the instrument at the location where there is heavy vibration or
shock.
2.5 Converter Reorientation Precautions
Please do not change the converter orientation at the customer’s site.