Yokogawa Wireless Temperature Transmitter YTA510 - Manual (Page 9)

IM 01C50T03-01E 3-2
3. OPERATION
• Sensor Backup Function (YTA320 only)
See Page 3-10
Configure the transmitter to automatically transfer
the input from Sensor1 to Sensor2 when Sensor1
fails.
H20: SNSR BACKUP, H21: RETURN SNS1
• Copy the Setting Data to the BT200
See Page 3-11
Copy the setting data of one temperature transmitter
to another via the BT200. (Uploading & Download-
ing)
H30: UPLOAD SELCT
• Write Protect See Page 3-11
Configure the transmitter to enable/disable write
protection parameters
H40: WRITE PROTCT
• Sensor Trim See Page 3-12
Adjust the integral characterization curve stored in
memory.
J05: SNSR1 CLR, J10: SNSR1 ZERO, J20: SNSR1
GAIN ..... Sensor1 Trim
K05: SNSR2 CLR, K10: SNSR2 ZERO, K20: SNSR2
GAIN ... Sensor2 Trim (YTA320 only)
J07: IN TRIM MODE
• Output Trim See Page 3-13
Used for fine adjustment of a 4 to 20 mA DC
output.
L05: OUT CLR, J10: OUTPUT MODE, J20: OUT ZERO,
J30: OUT GAIN
• Error Messages See Page 4-1
To show that the transmitter has malfunctioned.
A60: SELF CHECK
• Warnings See Page 4-3
To show that incorrect settings entered for a
particular usage of the transmitter.
I59: WARNING, H50: WARNING ENBL
• Logging Function See Page 4-5
Store the errors and min/max process values.