Yokogawa YFGW510 - Manual (Page 30)

<C4. Mounting>
C4-1
IM 01W02E01-01EN
C4. Mounting
Mount YFGW510 on the 2-inch pipe, placed vertically or horizontally, using the dedicated brack-
et. Make sure that the 2-inch pipe, the device, connectors or cables will be interfered each other,
because YFGW510 is accessed through its four or six sides. YFGW510 does not support any
other mounting method.
n Mounting on vertical pipe (Communications interface: 100BASE-
TX/100BASE-FX)
FC0401.ai
Figure C4-1 Mounting on vertical pipe (Communications interface: 100BASE-TX/100BASE-FX)
Assemble the bracket and attach YFGW510 to the bracket. Fasten it to the pipe using the U-
bolts.
For wiring procedure using cable connectors, see the section on wiring.