Yokogawa YFGW510 - Manual (Page 82)

<G2. Model, Suffix Codes and Option Codes>
G2-1
IM 01W02E01-01EN
G2. Model, Suffix Codes and Option
Codes
Model Suffix Codes Description
YFGW510  Field Wireless Access Point
Output
signal
-A  ISA100.11a
-C  ISA100.11a, IEEE802.11a/b/g
*1
Communication
interface
1  100 BASE-TX
2  100 BASE-FX
5  Wireless LAN
Housing 1  Low copper cast aluminum alloy
Electrical
Connection
0  G1/2 female, two electrical connections, without blind plugs
2  1/2NPT female, two electrical connections, without blind plugs
4  M20 female, two electrical connections, without blind plugs
5  G1/2 female, two electrical connections, one blind plug
*1
7  1/2 NPT female, two electrical connections, one blind plug *1
9  M20 female, two electrical connections, one blind plug *1
A  G1/2 female, two electrical connections, one SUS316 blind plug *1
C  1/2 NPT female, two electrical connections, one SUS316 blind plug *1
D  M20 female, two electrical connections, one SUS316 blind plug *1
--- A  Always A
License -S  Software license
Manual language 0  Japanese
1  English
Software media 0  Provided with DVD-ROM
1  None
Mounting bracket B  SUS304 2-inch pipe mounting (for horizontal piping) *2
D  SUS304 2-inch pipe mounting (for vertical piping) *2
J  SUS316 2-inch pipe mounting (for horizontal piping) *2
K  SUS316 2-inch pipe mounting (for vertical piping) *2
N  None
ISA100.11a antenna 1  Integral antenna 2dBi (2.4GHz)
A  Antenna adaptor: N-type connector
*3 *4
Wireless LAN antenna (1) *5 N  None
3  Remote antenna 2dBi (2.4GHz), antenna cable 3m with mounting bracket
4  Remote antenna 2dBi (2.4GHz, 5GHz), antenna cable 3m with mounting
bracket
A  Antenna adaptor: N-type connector *3 *4
Wireless LAN antenna (2) *5 N  None
3  Remote antenna 2dBi (2.4GHz) , antenna cable 3m
*6 with mounting bracket
4  Remote antenna 2dBi (2.4GHz, 5GHz), antenna cable 3m
*6 with mounting
bracket
A  Antenna adaptor: N-type connector *3 *4 *6
--- A  Always A
--- A  Always A
Option codes /Optional specifications
*1: Select in a wireless LAN client (communication interface code 5).
*2: A bolt is required for wall attachment.
*3: Select an antenna and a remote antenna cable. For details, refer to the accessory.
*4: In order for the wireless output of an antenna to get the maximum which the area permits, adjustment by service of Yokogawa is
required.
*5: Wireless LAN antenna must be connected to this product by using external antenna cables.
*6: Select only by 3, 4, and A of Wireless LAN antenna (1).