Yokogawa YFGW510 - Manual (Page 66)

<D3. Configuration Method>
D3-8
IM 01W02E01-01EN
D3.5 Setting of Wireless LAN 1 (WLAN C1)
Clicking the [WLAN C1] tab displays the controls and information shown in Figure D3-6.
FD0306.ai
Figure D3-6 WLAN C1 tab
This tab allows the setting of wireless LAN 1.
The setting items are as follows.
Item Descriptions Initial Value
SSID
Wireless LAN identification code. Enter the same value as the SSID of wire-
less LAN access point being connected. For details, see SSID setting.
Blank
Security Display-only, security method WPA2-PSK
Encryption Display-only, encryption method AES
Network Key
Encryption key. Enter the same value as the encryption key of wireless LAN
access point being connected. For details, see Network key setting.
Blank
Band Wireless LAN frequency band. Select either 2.4 GHz or 5 GHz. “2.4 GHz”
Channel
Wireless LAN channel. Select the channel to be used in wireless LAN. The
selectable channels vary depending on the frequency band. For details,
see Band and channel setting regulation.
“Auto”
Data Rate
Wireless LAN communication data rate. Select the data rate of wireless
LAN. The selectable data rates vary depending on the frequency band. For
details, see Data rate setting regulation.
“Auto”
IMPORTANT
Usable wireless channels are regulated by radio standards.
Please confirm that a installation region fulfills the standards before use.