Yokogawa YFGW510 - Manual (Page 37)

<C5. Wiring>
C5-5
IM 01W02E01-01EN
FC0503.ai
Metal network cable
Cable Gland for
Communication
RJ-45 connector
Figure C5-3 Connecting metal network cable
C5.3.2 Optical Network Cable Connection
l Cable
Item
Specification
Optical network cable
Standard 100BASE-FX
Connector SC connector (1-pole × 2)*
Cable
Multimode fiber (central wavelength: 1300 nm)
50/125 µm or 62.5/125 µm
The inner tension member must be nonmetal, such as FRP.
Transmission range 2 km (Max.)
* A double ferrule SC connector does not go through the connection hole. Be sure to use a short-boot SC connector.
IMPORTANT
To connect YFGW410 and YFGW510 using an optical network cable, the YFGW610 is required
for YFGW410. YFGW610 is used for conversion between 100BASE-TX and 100BASE-FX.