Yokogawa YFGW510 - Manual (Page 70)

<D3. Configuration Method>
D3-12
IM 01W02E01-01EN
D3.7 Setting of WLAN Redundancy
Clicking the [WLAN Redundancy] tab displays the controls shown in Figure D3-8.
FD0308.ai
Figure D3-8 WLAN Redundancy tab
This tab allows the setting for wireless LAN redundancy.
The setting items are as follows.
Item Descriptions Initial Value
Initial Port
Select a wireless LAN port to be used at startup. If “AUTO” is set, a
wireless LAN port with high RSSI is automatically selected.
“AUTO”
Path Switch
Select the communication path switching standard. YFGW510 supports
RSSI.
“RSSI”
Hysteresis
If RSSI is selected for the communication path switching standard,
specify the hysteresis width in dB.
30
After entering all the required items, click the [Save] button to store settings in YFGW510.