Checking or setting the date/time – Yokogawa µR10000 User Manual
Page 32
32
IM 04P01B01-02E
Checking or Setting the Date/Time
Checking the Date/Time
The date/time is shown on the display when the
DISP
key is pressed several times.
Setting the Date/Time
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Press the
key to show
Clock and then press the key.
Set=Clock
3.
Set the date and time and press the key.
04/01/17 10:39:47
Year/Month/Day Hour:Minute:Second
Press the
key to select the desired digit. Press the
key to select the
value.
Example: Changing from January to May in the figure below
Press the
key three times to move the cursor to the month position. Next,
press the
key four times to change the value from 1 to 5.
04/01/17 10:39:47
04/05/17 10:39:47
After change
Before change
DST=Summer
On recorders with the version 1.02 or earlier, press the key to select
Summer (DST) or
Winter (standard time), whichever the set time belongs to. Then press the key.
4.
When the
Setting complete screen appears, press the
ESC/?
key.
Clock
Setting complete
5.
Hold down the
MENU
key for 3 seconds to return to Operation mode.
Explanation
The date format can be changed by date format type of basic setting mode.
Preparing to Record
* When the key or key is pressed while holding down the
SHIFT key, the operation is reversed as
when the respective key is pressed by itself.