Yokogawa µR10000 - Manual (Page 5)

5
IM 04P01B01-02E
WARNING
• Use the Correct Power Supply
Ensure that the source voltage matches the voltage of the power
supply before turning ON the power.
• Protective Grounding
Make sure to connect the protective grounding to prevent elec-
tric shock before turning ON the power.
• Necessity of Protective Grounding
Never cut off the internal or external protective earth wire or
disconnect the wiring of the protective earth terminal. Doing so
invalidates the protective functions of the instrument and poses
a potential shock hazard.
• Defect of Protective Grounding
Do not operate the instrument if the protective earth or fuse
might be defective. Make sure to check them before operation.
• Do Not Operate in an Explosive Atmosphere
Do not operate the instrument in the presence of flammable
liquids or vapors. Operation in such environments constitutes a
safety hazard.
• Do Not Remove Covers
The cover should be removed by YOKOGAWA’s qualified
personnel only. Opening the cover is dangerous, because some
areas inside the instrument have high voltages.
• External Connection
Connect the protective grounding before connecting to the item
under measurement or to an external control unit.
• Damage to the Protective Structure
Operating the recorder in a manner not described in this manual
may damage its protective structure.
Portable Type (/H5x Option)
• Use the Correct Power Supply
Ensure that the power supply is within the maximum rated volt-
age range of the provided power cord before connecting the
power cord.
• Use the Correct Power Cord and Plug
To prevent electric shock or fire, be sure to use the power cord
supplied by YOKOGAWA. The main power plug must be plugged
into an outlet with a protective earth terminal. Do not disable this
protection by using an extension cord without protective earth
grounding. The power cord is designed for use with this instru-
ment. Do not use the power cord with other instruments.
• Connect the Protective Grounding Terminal
The power cord for the µR10000 is a three-prong type power
cord. Connect the power cord to a properly grounded three-
prong outlet.
CAUTION
This instrument is a Class A product. Operation of this instru-
ment in a residential area may cause radio interference, in which
case the user is required to take appropriate measures to cor-
rect the interference.
• Exemption from Responsibility
• YOKOGAWA makes no warranties regarding the product except
those stated in the WARRANTY that is provided separately.
• YOKOGAWA assumes no liability to any party for any loss or
damage, direct or indirect, caused by the user or any unpredict-
able defect of the product.
• Handling Precautions of the Software
• YOKOGAWA makes no warranties regarding the software ac-
companying this product except those stated in the WARRANTY
that is provided separately.
• Use the software on a single PC.
• You must purchase another copy of the software, if you are to
use the software on another PC.
• Copying the software for any purposes other than backup is
strictly prohibited.
• Please store the original media containing the software in a safe
place.
• Reverse engineering, such as decompiling of the software, is
strictly prohibited.
• No portion of the software supplied by YOKOGAWA may be
transferred, exchanged, sublet, or leased for use by any third
party without prior permission by YOKOGAWA.
Handling Precautions
• Use care when cleaning the recorder, especially any plastic
parts. When cleaning, wipe using a dry soft cloth. Do not use
chemicals such as benzene or thinner, since these may cause
discoloring and deformation.
• Keep electrically charged objects away from the signal terminals.
This may damage the recorder.
• Do not apply volatile chemicals to the door glass, display, panel
keys, etc. Do not allow rubber and vinyl products to remain in
contact with the recorder for long periods of time. This may dam-
age the recorder.
• When not in use, make sure to turn OFF the power switch.
• If there are any symptoms of trouble such as strange odors or
smoke coming from the recorder, immediately turn OFF the
power switch and the power supply source. Then, contact your
nearest YOKOGAWA dealer.
How to Use This Manual
This manual covers information regarding the recorders with Eng-
lish as the display/printing language (suffix code “2”).
The following markings are used in this manual.
Improper handling or use can lead to injury to the user or dam-
age to the instrument. This symbol appears on the instrument to
indicate that the user must refer to the user’s manual for special
instructions. The same symbol appears in the corresponding place
in the user’s manual to identify those instructions. In the manual,
the symbol is used in conjunction with the word “WARNING” or
“CAUTION.”
WARNING
Calls attention to actions or conditions that could cause serious or
fatal injury to the user, and precautions that can be taken to prevent
such occurrences.
CAUTION
Calls attentions to actions or conditions that could cause light injury
to the user or damage to the instrument or user’s data, and precau-
tions that can be taken to prevent such occurrences.
Note
Calls attention to information that is important for proper operation
of the instrument.