Changing the chart speed, Viewing the recorded results – Yokogawa µR10000 User Manual
Page 42
42
IM 04P01B01-02E
Changing the Chart Speed
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Press the
key to show
Chart and then press the key.
Set=Chart
Chart speed
Displays a description of the setup item.
3.
Set the chart speed and press the key.
mm/h= 20
1/1500mm/h
Current chart speed.
Displays the range that can be specified.
(Display example on the dot model)
On the pen model, press the
key to select the chart speed.
Chart speed on the pen model (unit: mm/h)
5
6
8
9
10
12
15
16
18
20
24
25
30
32
36
40
45
48
50
54
60
64
72
75
80
90
96
100
120
125
135
150
160
180
200
225
240
250
270
300
320
360
375
400
450
480
500
540
600
675
720
750
800
900
960
1000
1080
1200
1350
1440
1500
1600
1800
2000
2160
2250
2400
2700
2880
3000
3600
4000
4320
4500
4800
5400
6000
7200
8000
9000
10800 12000
On the dot model, enter a vale to set the chart speed. The chart speed can be set
in the range of 1 to 1500 mm/h in 1 mm steps.
Press the
key to select the desired digit. Press the
key to select the
value.
4.
When the
Setting complete screen appears, the new chart speed is applied.
Chart speed
Setting complete
Press the
ESC key to change the chart speed again.
Hold down the
MENU
key for 3 seconds to return to Operation mode.
Viewing the Recorded Results
Pull the front cover tab of the chart cassette to open the front cover. The recorded chart
paper can be pulled out for viewing.
Front cover tab
Recorded chart paper can
be pulled out.
* When the key or key is pressed while holding down the
SHIFT key, the operation is reversed as
when the respective key is pressed by itself.
Recording/Displaying Data