Nematron Pointe Controller User Manual
Page 62
Chapter 3: Quickstart Project
Pointe Controller User Guide
60
Once the PointeControl Monitor window is active, you can download your project
runtime to the Pointe Controller unit:
1. Click the Controller drop-down menu and select the Pointe Controller
unit from the listed devices.
2. Click the Project drop-down menu and select your project runtime. If you
have followed the examples given in the quickstart, your project runtime
should be named “Mytest.”
3. Click the Load button. Your PC will spend several moments preparing the
download. (The exact time depends on the processing speed of your PC.)
TIP: You can get a detailed view of the download process by selecting the
Console tab, as shown below. The console messages are generated by
PointeControl Monitor as it prepares your project to run on the Pointe