Nematron Pointe Controller - Manual (Page 95)

Pointe Controller User Guide Chapter 4: System Design and Installation
93
4.7 Determining Your I/O Needs
The Pointe Controller system offers the following ways to add I/O to the system:
Local I/O – consists of I/O modules installed in the Pointe Controller unit
itself.
Remote I/O – consists of I/O modules installed in OptiLogic RTU bases
connected to the Pointe Controller unit through the Ethernet network.
A Pointe Controller system can be developed using many different arrangements
of these configurations. All I/O configurations use the standard complement of
OptiLogic I/O modules and bases.
TIP: For complete technical descriptions of all OptiLogic modules and panels, see
Appendix A, “OptiLogic Technical Specifications,” starting on page 231.
4.7.1 Available I/O Modules
The following is a list of I/O and operator panel modules available at the time of
this printing. Keep in mind that the range of avaliable OptiLogic modules is
always expanding. Many more modules will be available in the near future. To
get a current list of available modules, visit our Web site at
http://www.nematron.com/PointeControl.
The following I/O modules are currently available (generally off the shelf):
Digital Inputs
OL2201 8 Digital input simulator (toggle switch input)
OL2205 4 AC/DC (10-30V) In -- Each input has a separate common
OL2208 8 DC (10-30VDC) In
OL2211 8 AC (80-132VAC) In
OL2252 2 high speed counters (up to 20KHz) inputs. 6 additional inputs configurable
as general purpose DC inputs or control signals.
OL2258 High speed counter input for pulse encoder type devices. Up/Down count,
Pulse & Direction or Quatdrature inputs accepted. Pulse counting to 80KHz
(160KHz for quadrature). Two high speed transistor outputs.
Digital Outputs
OL2104 4 Relay (2A resistive @ 24VDC, 1A @120VAC)
OL2108 8 Relay (2A resistive @ 24VDC, 1A @120VAC)
OL2109 8 Transistor (500mA sink)
OL2111 8 AC Solid State Relay (1A)
Analog Inputs / Outputs