Nematron Pointe Controller - Manual (Page 77)

Pointe Controller User Guide Chapter 4: System Design and Installation
75
Communications, Ethernet
• Type: 10Base-T Ethernet
• Data Rate: 10 Mbps
• Connection: RJ45
• Ethernet Protocols: TCP/IP, OptiLogic UDP/IP, Modbus
TIP: For a complete description of Ethernet connections, see page 103.
Communications, Serial
• Baud rates: 300, 1200, 2400, 4800, 9600, 19.2K (selectable)
• Data bits: 7 or 8 (selectable)
• Parity: odd, even, or none (selectable)
• Stop bits: 1 or 2 (selectable)
• Connection: RJ12
Pin # Description
6 GND
5 5V power out
4 Transmit data (TX)
3 Receive data (RX)
2 Reserved (do not connect)
1 GND