Brocade Network OS Administrator’s Guide v4.1.1 - Manual (Page 386)

• The deleted user or auto port-profile is automatically deleted from the default port-profile domain.
• The show running-config command or the show port-profile domain command shows the port-
profiles in the default-profile-domain.
• The user is not allowed to edit the default port-profile domain.
The following rules apply after service VFs are enabled in the fabric.
• The user can edit the UpgradedVlanProfile just like any other port-profile.
• The newly created port-profile is not automatically added to the default domain. It can only be
explicitly added to or removed from the default profile-domain.
• vCenter-managed auto-profiles continue to be added to or deleted automatically from the default
port-profile domain.
NOTE
In Network OS 4.1.1, the vCenter auto-profile does not support service VF classification.
• The show running-config command or the show port-profile domain command shows the port-
profiles in the default port-profile domain.
• The user is allowed to edit the default port-profile domain.
• The user is not allowed to delete the default-profile-domain.
The following table compares the results of a show running-config command before and after an
upgrade from Network OS 4.0.0 to Network OS 4.1.1.
Configuring Virtual Fabrics
386 Network OS Administrator’s Guide
53-1003225-04