Brocade ICX 6610 Stackable Switch Hardware Installation Guide - Manual (Page 35)

4-Post rack mount installation
Kits for 4-post rack mounting are not included in the shipping carton and must be ordered separately.
NOTE
Use the following procedure when installing the Brocade ICX 6610 device in a 4-post rack cabinet. For
2-post cabinets, follow the procedures in the “2-Post rack mount installation” section.
Remove the rack mount kit from the shipping carton. The kit contains the following:
• ‐ Two mounting brackets.
‐ Two pairs of extension brackets. Use the shorter pair for rack that are up 27 inches deep.
Use the longer pair for racks up to 32 inches deep.
‐ Thirty-two 8-32 x 3/8 in., panhead Phillips screws with patchlocks.
‐ Eight 10-32 x 5/8 in., panhead Phillips screws (torque to 25 in-lb, 29 cm-kg).
4-Post rack mount installation
Brocade ICX 6610 Stackable Switch Hardware Installation Guide 33
53-1003082-02