Brocade ICX 6610 Stackable Switch Hardware Installation Guide - Manual (Page 59)

4. Insert the DC power supply source wires into the DC wiring assembly, matching the terminals.
FIGURE 45 DC power supply wiring assembly
1 Wire tightening screws
2 DC power source wires
3 Earth ground wire
4 Assembly screws
5. Use the wire tightening screws to secure the wires.
6. Insert the earth ground wire into the ground terminal on the DC wiring assembly.
Installing the ICX 6610 Switch
Brocade ICX 6610 Stackable Switch Hardware Installation Guide 57
53-1003082-02