Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 167)

Brocade Mobility RFS7000-GR Controller System Reference Guide 153
53-1001944-01
Viewing associated MU details
4
3. Select a MU from the table in the Status screen and click the Details button.
4. Refer to the following read-only MU’s transmit and receive statistics:.
MAC Address Displays the Hardware or Media Access Control (MAC) address for the MU.
IP Address Displays the unique IP address for the MU. Use this address as necessary
throughout the applet for filtering and device intrusion recognition and approval.
Power Save Displays the current PSP state of the MU. This field has two potential settings. PSP
indicates if the MU is operating in PSP mode. In PSP, the MU runs enough power to
check for beacons, and is otherwise inactive. CAM indicates the MU is
continuously aware of all radio traffic. CAM is recommended for MUs transmitting
frequently.
WLAN Displays of the WLAN the MU is currently associated with.
VLAN Displays the VLAN parameter for the name of the VLAN the MU is currently mapped
to.
Last Active Displays the time the MU last interoperated with the switch.
QoS Information Displays an indicator of the wireless device’s battery life. Additionally, the service
period for the selected MU is also displayed.
Radio Index Displays is a numerical identifier used to associate a particular Radio with a set of
statistics. The Index is helpful for distinguishing the a particular radio from other
MU radios with similar configurations.
Radio Type Displays the radio type used by the adopted MU. The switch supports 802.11b
MUs as well as 802.11 a/b and 802.11 a/g dual-radio MUs. The radio also
supports 802.11a only and 802.11g MUs.
Base Radio MAC Displays the SSID of the Access Port when initially adopted by the switch.
BSS Address Displays the MU’s BSSID.