Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 265)

Brocade Mobility RFS7000-GR Controller System Reference Guide 251
53-1001944-01
DHCP server settings
5
1. Select Services > DHCP Server from the main menu tree.
2. Select the Bindings tab.
3. Refer to the contents of the Bindings tab for the following information:
4. Click the Export button to display a screen used to export the DHCP Binding information to a
secure location.
Reviewing DHCP dynamic bindings
Dynamic DHCP bindings automatically map a hardware address to an IP address from a pool of
available addresses. The Dynamic Bindings tab displays only automatic bindings.
To view detailed Dynamic DHCP Binding Status information:
IP Address Displays a IP address for each client with a listed MAC address. This column is
read-only and cannot be modified.
MAC Address / Client
ID Displays the MAC address (client hardware ID) of the client using the switch’s
DHCP Server to access switch resources. The MAC address is read-only and cannot
be modified.