Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 212)

198 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Viewing Access Port Information
4
11. Click the Calibration Status button to open a dialogue with the following calibration status
information:
12. Click OK to use the changes to the running configuration and close the dialog.
13. Click Cancel to close the dialog without committing updates to the running configuration.
Voice statistics
To view Voice statistics:
Last Calibration Start
Time Displays the date and time that the last Smart RF calibration began.
Last Calibration End
Time Displays the date and time that the last Smart RF calibration ended.
Next Calibration Start
Time Displays the date and time scheduled for the next Smart RF calibration.
Current Action Displays what the Smart RF engine is currently doing. If there is a scan in process it
will be displayed here.
Master Switch IP Displays the IP address of the master switch in the cluster.
Is Cluster Master Displays the cluster master status of the switch. If the switch is the master it will
display true, otherwise it will display false.