Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 175)

Brocade Mobility RFS7000-GR Controller System Reference Guide 161
53-1001944-01
Viewing associated MU details
4
Viewing voice statistics
The Voice Statistics screen displays read-only statistics for each MU. Use this information to assess
if configuration changes are required to improve network performance. If a more detailed set of MU
statistics is required, select a MU from the table and click the Details button.
To view MU voice statistics details:
1. Select Network > Mobile Units from the main menu tree.
2. Click the Voice Statistics tab.
3. Refer to following details as displayed within the MU Voice Statistics table:
Call Index Displays the index value of the call in the list
MAC Address Displays the MAC address of the MU participating in the call
Voice Protocol Displays the voice protocol in use during the call. Voice protocol include:
•
TSPEC
•
Spectralink
•
H.323
Media Protocol Specifies the Media Transport protocol used in the call (mostly RTP)
Call State Displays the call state for the Voice Call. Call state can be one of:
•
Initiated
•
Accepted
•
Established
Terminated calls are not displayed here.
Call Codec Displays the CODEC used in the call like G.711, G.723. etc.