Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 204)

192 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
Configuring content filtering settings
6
3. Click the Reset VPNs button to reset active VPNs. Selecting Reset VPNs forces renegotiation of
all the Security Associations and keys. Users could notice a slight pause in network
performance.
4. Reference the IKE Summary field to view the following:
5. Click Logout to securely exit the access point applet. A prompt displays confirming the logout
before the applet is closed.
Configuring content filtering settings
Content filtering allows system administrators to block specific commands and URL extensions
from going out through the access point’s WAN port. Therefore, content filtering affords system
administrators selective control on the content proliferating the network and is a powerful data and
network screening tool. Content filtering allows the blocking of up to 10 files or URL extensions and
allows blocking of specific outbound requests.
To configure content filtering for the Brocade Mobility 7131N-FGR Access Point:
Outb SPI The Outb SPI column displays the outbound Security Parameter
Index (SPI) for each tunnel. The SPI is used locally by the Brocade
Mobility 7131N-FGR Access Point to identify a security
association. There are unique outbound and inbound SPIs.
Inb SPI The Inb SPI column displays the inbound Security Parameter Index
(SPI) for each of the tunnels. The SPI is used locally by the Brocade
Mobility 7131N-FGR Access Point to identify a security
association. There are unique outbound and inbound SPIs.
Life Time Use the Life Time column to view the lifetime associated with a
particular Security Association (SA). Each SA has a finite lifetime
defined. When the lifetime expires, the SA can no longer be used
to protect data traffic. The maximum SA lifetime is 65535
seconds.
Tx Bytes The Tx Bytes column lists the amount of data (in bytes) transmitted
through each configured tunnel.
Rx Bytes The Rx Bytes column lists the amount of data (in bytes) received
through each configured tunnel.
Tunnel Name Displays the name of each of the tunnels configured to use IKE for
automatic key exchange.
IKE State Lists the state for each of the tunnels configured to use IKE for
automatic key exchange. When the tunnel is not active, the IKE
State field displays NOT_CONNECTED. When the tunnel is active,
the IKE State field displays CONNECTED.
Destination IP Displays the destination IP address for each tunnel configured to
use IKE for automatic key exchange.
Remaining Life Lists the remaining life of the current IKE key for each tunnel.
When the remaining life on the IKE key reaches 0, IKE initiates a
negotiation for a new key. IKE keys associated with a renegotiated
tunnel.