Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 439)

Brocade Mobility 7131N-FGR Product Reference Guide 427
53-1001947-01
System commands
8
BR7131N>admin(system.cmgr)> expcert
Exports the certificate file to a user defined location.
Syntax
To export certificate information from a Brocade Mobility 7131N-FGR Access Point:
admin(system.cmgr)>expcert ?
<type> <file name> <cr> : type: sftp
: file name: Certificate file name
: Server options for this file are the same
: as that for the configuration file
admin(system.cmgr)>expcert sftp AP-71x1certs.txt
To configure certificate management settings while conducting a firmware update or restoring a
factory default configuratrion:
admin(system.cmgr)> ?
genreq : generate a certificate request
delself : deletes a signed certificate
loadself : loads a signed certficiate signed by the CA
listself : lists the loaded signed self certificate
loadca : loads the root CA certificate
delca : deletes the root CA certificate
listca : lists the loaded root CA certificate
showreq : displays certificate request in PEM format
delprivkey : deletes the private key
listprivkey : lists the names of the private keys
expcert : exports the target certficate file
impcert : imports the target certficate file
(..) : goes to the parent menu
/ : goes to the root menu
save : saves the configuration to system flash
quit : quits the CLI session
For information on configuring certificate settings using the applet (GUI), see “Importing a CA
certificate” on page 69.
expcert Exports the access point’s CA or Self certificate file.