Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 423)

Brocade Mobility 7131N-FGR Product Reference Guide 411
53-1001947-01
System commands
8
BR7131N>admin(system.aap-setup)>set
Sets Brocade Mobility 7131N-FGR Access Point’s Adaptive AP configuration.
Syntax
admin(system.aap-setup)>set auto-discovery enable
admin(system.aap-setup)>set ipadr 192.235.111.10
admin(system.aap-setup)>set port 1812
admin(system.aap-setup)>set passphrase mudskipper
admin(system.aap-setup)>set load-balancing enable
For information on configuring adaptive AP using the applet (GUI), see “Adaptive AP setup” on
page 63.
For an overview of adaptive AP functionality and its implications, see “Adaptive AP” on page 545.
set auto-discovery Sets the switch auto-discovery mode (enable/disable).
ipadr Defines the switch IP address used.
name Defines the switch name for DNS lookups (up to 127 characters).
port Sets the port.
passphrase Defines the pass phrase or key for switch connection.
tunnel-to-switch Enables/disables the tunnel between switch and access point.
ac-keepalive Defines the keepalive interval.
load-balancing Enables or disables AAP load balancing.