Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 221)

Brocade Mobility 7131N-FGR Product Reference Guide 209
53-1001947-01
Configuring user authentication
6
1. Select System Configuration -> User Authentication -> User Database from the menu tree.
Refer to the Groups field for a list of all groups in the local Radius database. The groups are
listed in the order added. Although groups can be added and deleted, there is no capability to
edit a group name.
2. Click the Add button and enter the name of the group in the new blank field in the Groups
table.
3. To remove a group, select the group from the table and click the Del (Delete) key.
The Users table displays the entire list of users. Up to 100 users can be entered here. The
users are listed in the order added. Users can be added and deleted, but there is no capability
to edit the name of a group.
4. To add a new user, click the Add button at the bottom of the Users area.
5. In the new line, type a User ID (username).
6. Click the Password cell. A small window displays. Enter a password for the user and click OK to
return to the Users screen.
7. Click the List of Groups cell. A new screen displays enabling you to associate groups with the
user. For more information on mapping groups with a user, see “Mapping users to groups” on
page 210.
8. Click Apply to save any changes to the Users screen. Navigating away from the screen without
clicking Apply results in all changes to the screen being lost.
9. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on the Users screen to the last saved configuration.
10. Click Logout to securely exit the Access Point applet. A prompt displays confirming the logout
before the applet is closed.