Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 415)

Brocade Mobility 7131N-FGR Product Reference Guide 403
53-1001947-01
System commands
8
BR7131N>admin(system)>set
Sets Brocade Mobility 7131N-FGR Access Point system parameters.
Syntax
admin(system)>set name phils
admin(system)>set loc engineering
admin(system)>set email [email protected]
admin(system)>set cc us
NOTE
This name will appear in the WIPS server when one of the radios is configured as a sensor and the
WIPS functionality connects to the WIPS server. The WIPS module only accepts names with up to 20
characters, keep that if intending to use this AP as a sensor.
For information on configuring System Settings using the applet (GUI), see “Configuring system
settings” on page 56.
set name <name> Sets the Brocade Mobility 7131N-FGR Access Point system name to <name> (1
to 59 characters). The access point does not allow intermediate space
characters between characters within the system name. For example, “BR7131N
sales” must be changed to “BR7131Nsales” to be a valid system name.
loc <loc> Sets the Brocade Mobility 7131N-FGR Access Point system location to <loc> (1
to 59 characters).
email <email> Sets the Brocade Mobility 7131N-FGR Access Point admin email address to
<email> (1 to 59 characters).
cc <code> Sets the Brocade Mobility 7131N-FGR Access Point country code using two
letters <code>.