Brocade Mobility 7131N-FGR Access Point Product Reference Guide (Supporting software release 4.0.0.0-35GRN and later) - Manual (Page 422)

410 Brocade Mobility 7131N-FGR Product Reference Guide
53-1001947-01
System commands
8
BR7131N>admin(system.aap-setup)>show
Displays the access point’s Adaptive AP configuration.
Syntax
Example
admin(system.aap-setup)>show
Auto Discovery Mode : disable
Switch Interface : lan1
Switch Name : greg
Static IP Port : 24576
Static IP Address :
IP Address 1 : 0.0.0.0
IP Address 2 : 0.0.0.0
IP Address 3 : 0.0.0.0
IP Address 4 : 0.0.0.0
IP Address 5 : 0.0.0.0
IP Address 6 : 0.0.0.0
IP Address 7 : 0.0.0.0
IP Address 8 : 0.0.0.0
IP Address 9 : 0.0.0.0
IP Address 10 : 0.0.0.0
IP Address 11 : 0.0.0.0
IP Address 12 : 0.0.0.0
Tunnel to Switch : disable
AC Keepalive : 5
Load Balancing : enable
Current Switch : 157.235.22.11
AP Adoption State : AAP not adopted
admin(system.aap-setup)>
For information on configuring adaptive AP using the applet (GUI), see “Adaptive AP setup” on
page 63.
For an overview of adaptive AP functionality and its implications, see “Adaptive AP” on page 545.
show Displays the access point’s Adaptive AP configuration.