LumaSense Technologies INNOVA 1316A-3 - Manual (Page 40)

Chapter 3
_________________________________________________________________________________________
_____________________________________________________________________________
BE6024-12 1316A-3 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 40 of 96
Start Soft Key
On pressing the Start Soft Key data is collected by the BZ6014
Application Software to be displayed on the screen.
Start can also be activated by pulling down the Bench Command
menu and select Data/Status
The following window will appear:
Figure 3.6. The Data Status window.
It is from this window possible to select to have the data transmitted
as One Packet for a number of measurement results or to have the
data transmitted continuously.