LumaSense Technologies INNOVA 1316A-3 - Manual (Page 57)

Chapter 4
_________________________________________________________________________________________
_____________________________________________________________________________
BE6024-12 1316A-3 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 57 of 96
1. Ensure that the monitor has been switched on for at least 30
minutes.
2. When the Main Menu screen is displayed, select Zero / O
2
Span
from the Bench Command pull-down menu.
When the Multi Gas Monitor – INNOVA 1316A-3 receives the Zero
command, it checks the system status.
When all conditions for zero calibration are met, the Process In
Progress is activated (see figure 4.3 ).