LumaSense Technologies INNOVA 1316A-3 - Manual (Page 92)

Chapter 5
_________________________________________________________________________________________
_____________________________________________________________________________
BE6024-12 1316A-3 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 92 of 96
Figure 5.6. The Device Control Window.
In the DCM 1 select DC to be Set the remaining DCM /DC are set as shown in
Figure 5.6. Press the Send button.
Now it is possible to hear the click from the Valve if the valve is functioning
properly.
Please remember to clear the DCM 1 by selecting Clear and pressing the Send
button.
5.1.6 Miscellaneous Data.
Pull down the Bench Command Menu.