LumaSense Technologies INNOVA 1316A-3 - Manual (Page 72)

Chapter 4
_________________________________________________________________________________________
_____________________________________________________________________________
BE6024-12 1316A-3 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 72 of 96
Pull Down the Bench Command menu and select the "Mode Select" bench
command, see figure 4.19.
Figure 4.19 The Bench Command Menu showing “Mode Select”
In the “Mode Select”-window set the group “Action” to “Temporary Change” and
the group “New Mode” to “3 – 6601, New”, see figure 4.20. Press the “Send”
button to set mode 3 temporary.
Figure 4.20 The Mode select window With Mode 3 selected.