Nature Power Solar Motion Light (22040 ) - Manual (Page 3)

Version 1.1
3
Replacing Batteries
1. Batteries are located in the battery housing at the back of the light.
2. Remove screws from front of the battery housing to access batteries.
3. Replace batteries with rechargeable batteries of the same type and rating. (AA Ni-cd 600mA)
4. Reassemble battery housing.
Maintenance

Ensuring the lamp is kept clean will optimise performance

Clean Solar cell with a damp towel, Do not apply excessive pressure.

Do not use any solvents or cleaning agents on the solar modules.

Replacing the batteries once a year can increase the Solar Motion Light’s lifetime.
Safety Information

Do not install close to flames or flammable gasses
 Keep away from children

Do not install on a unstable surfaces/position

Do not stare directly at the lights while they are on

To prevent the unit from falling, install the base unit tightly with expansion screw

Solar Security light, cannot prevent crimes, its invented to alarm use of motion

Do not install in close proximity to other light sources
Limited Warranty
Proof of purchase required
Nature Power warrants to the original purchaser that this product is free from defects in materials and
workmanship for a period of 1 year from date of purchase.
For more information contact:
Nature Power Products
1-800-588-0590
www.naturepowerproducts.com
[email protected]
Scan me for more information