Seca 985 - Manual (Page 36)

36
Minimum load 2 kg
Graduations
to 200 kg: 100 g
200 kg to 250 kg: 200 g
Accuracy at first calibration
to 50 kg: ± 50 g
50 kg to 200 kg: ± 100 g
200 kg to 250 kg: ± 200 g
Subtractive Tare device T- = 250 kg
Capacity Lim = 500 kg
Maximum tare weight of bed 250 kg
Power supply 9 to 12 V= controlled
10. Spare parts and accessories
Power supply
Model dependent mains unit
Plug-in mains unit, Euro: 230V~ / 50Hz, 12V= / 150mA
seca spare part no.: 68-32-10-252
Plug-in mains unit, Int: 100-240V~ / 50-60Hz, 12V= / 0.5A
seca spare part no.: 68-32-10-265
Plug-in mains unit
Use only seca original plug-in mains units with 9 V or controlled 12 V output voltage. Com-
mercially-available mains units may supply a higher voltage than stated and thus lead to
damage to the scale.
11. Disposal
Disposing of the device
Do not dispose of the device in
domestic waste. The device must
be disposed of properly as elec-
tronic waste. Follow the national regula-
tions which apply in your case. For further
information, contact our service depart-
ment at:
[email protected]
Rechargeable b atteries
Do not throw old rechargeable batteries
into the domestic refuse! Ensure that re-
chargeable batteries are properly dis-
posed of at local collection points.