Triton MAKO 2000 Operation Manual - Manual (Page 133)

5-93
S
ECTION
5 - M
ANAGEMENT
F
UNCTIONS
T RITON S YSTEMS , I NC .
M AKO C ASH D ISPENSER O PERATION M ANUAL
F
UNCTION
: BAUD RATE
F
ACTORY
D
EFAULT
: ‘1200’
A
CCESS
I
NSTRUCTIONS
:
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select SET TERMINAL PARAMETERS.
3.) Select TELEPHONE.
4.) Select the MODEM SETUP option.
5.) Select BAUD RATE.
D
ESCRIPTION
:
The bit rate of the modem can be controlled with this function. The rate can be set to 2400 or 1200
bits per second (bps). The default rate depends on your processor. Do not select 2400 if your
processor does not support it.
E
RROR
C
ONDITIONS
:
If the speed of the modem is set to 2400 bps, it may not connect to a 1200 bps system. The baud
rate of the modem should always be set to the value indicated by your processor.