Triton MAKO 2000 Operation Manual - Manual (Page 80)

5-40
S
ECTION
5 - M
ANAGEMENT
F
UNCTIONS
T RITON S YSTEMS , I NC .
M AKO C ASH D ISPENSER O PERATION M ANUAL
F
UNCTION
: LOW RECEIPT PAPER
F
ACTORY
D
EFAULT
: ‘OUT OF SERVICE’
A
CCESS
I
NSTRUCTIONS
:
1.) Select TERMINAL CONFIGURATION from the
MANAGEMENT FUNCTIONS menu.
2.) Select the PRINTER SETTINGS option.
3.) Choose the LOW RECEIPT PAPER
option.
D
ESCRIPTION
:
After selecting the LOW RECEIPT PAPER ON/OFF option, a screen displaying,” WHEN RECEIPT
PAPER BECOMES LOW, THE ATM WILL BE OUT OF SERVICE” (or IN SERVICE depending
on terminal setup). Change to IN SERVICE or OUT OF SERVICE by pressing the Screen Key
next to the appropriate text and pressing the EXIT key.
Selecting the IN SERVICE options will allow the terminal to continue to operate after it senses a
Receipt Printer Paper Low condition (Error Code 183). Selecting this option will allow the terminal
to operate with low or no receipt paper in the terminal.
Selecting the OUT OF SERVICE option will allow the terminal to report a Receipt Printer Paper
Low condition (Error Code 183), and will place the terminal in an OUT OF SERVICE condition
until the receipt paper is replenished.
E
RROR
C
ONDITIONS
:
Error Code 183 – Receipt Printer Paper Low will take the terminal OUT OF SERVICE. To
restore the terminal to normal operation the paper must be replenished and the Reset Error button
pressed after the terminal has been reset and is displaying the OUT OF SERVICE screen.